See guillotine cuts with grain, trim and actual stock.
Result calculated from the displayed dimensions.
| Sheet | Part | Length | Width | Rotated 90° | Reason |
|---|---|---|---|---|---|
| 1 | Side | 47.2441 in | 15.748 in | No | — |
| 1 | Side | 47.2441 in | 15.748 in | No | — |
| 1 | Shelf | 31.4961 in | 15.748 in | No | — |
| 1 | Shelf | 31.4961 in | 15.748 in | No | — |
| 1 | Shelf | 31.4961 in | 15.748 in | No | — |
| 1 | Shelf | 31.4961 in | 15.748 in | No | — |
| Stock bar | Length | Width | Thickness | Material / colour |
|---|---|---|---|---|
| Sheet | 15.6299 in | 39.9213 in | 0.7087 in | Oak |
| Sheet | 31.4961 in | 8.189 in | 0.7087 in | Oak |
| Sheet | 28.5039 in | 71.6535 in | 0.7087 in | Oak |
| Sheet | 31.4961 in | 39.9213 in | 0.7087 in | Oak |
Feasible heuristic cutting plan; a global optimum is not guaranteed. Check the sequence, work support and your equipment's cutting capacity.
Schematic drawing. Written dimensions and the parts list take precedence over screen scale.
Numbers on the drawing follow cut order. Offcuts and saw loss remain separate from parts.
How to check this calculation
We compare part orders and cutting sequences. Each part occupies a free rectangle split by guillotine cuts, reserving saw kerf. Grain-locked parts do not rotate. Cut numbers follow execution order in the remaining rectangle.
Position origin: left edge or base indicated in the drawing.
Limits: 200 rows; up to 500 sheet parts and 1,000 linear parts. Stock quantities are finite.